ReferralKnow a company that should run on Procura? Refer it and get rewarded for every signed client.Refer a company, get rewardedDiscover the programmeDiscover
Resources / Procure-to-pay · Procura team · 17 November 2026 · 9 min read
Procure-to-pay

The procure-to-pay process: 8 steps, the documents and the controls

Procure-to-pay (P2P) is the chain of steps between "we need something" and "the supplier has been paid and the books are right". Each step produces a document, and each document is checked against the one before it. When the chain is complete, overspending, overbilling and payment fraud become hard. When a link is missing, they become easy. This guide walks through the eight steps, follows one purchase end to end, and lists the control that belongs at each step.

01The eight steps at a glance

StepOwnerDocument producedKey control
1. Supplier setupPurchasing, financeSupplier recordIdentity, tax ID and bank details verified
2. Need and requisitionRequesterPurchase requisitionNeed, budget line and amount stated
3. ApprovalBudget owner, approversApproved requisitionApproval matrix, no self-approval, budget check
4. SourcingBuyerQuotes, bid evaluationCompetitive quotes above a threshold
5. Purchase orderBuyerPurchase orderPO only after approval; commitment recorded
6. ReceiptReceiver or requesterGoods receipt or service confirmationRecorded by someone other than the buyer
7. Invoice and matchingAccounts payableMatched invoiceThree-way match within tolerance, duplicate check
8. Payment and recordingFinancePayment run, ledger entriesSeparate payment approval, bank details checked

If you want the definition in one paragraph first, see the procure-to-pay glossary entry.

02Steps 1 to 3: supplier, request and approval

1. Supplier setup. Before the first order, the supplier is created once: legal name, registration and tax identifiers, address, contacts, payment terms and bank details. Bank details are verified by a call to a number you found independently. The person who creates suppliers should not be the person who approves their payments. Our free Supplier Evaluation Scorecard helps you decide which suppliers to keep once they are active.

2. Need and requisition. An employee states what is needed, why, how much it should cost, which budget it is charged to and when it is needed. The purchase requisition vs purchase order guide explains why this internal step is separate from the order.

3. Approval. The request is routed according to your approval matrix: amount, budget status and category decide who approves. The budget owner sees what is left before deciding. See the purchase approval workflow guide for a sample matrix.

03Steps 4 to 6: sourcing, order and receipt

4. Sourcing. For catalogue items or existing contracts, this step is instant. Above a threshold, the buyer collects competing quotes (three is a common rule) or runs a request for quotation, then documents why the chosen offer won. The free Bid Evaluation Matrix records weighted scores and the decision.

5. Purchase order. The buyer issues the PO: supplier, lines, prices, delivery date, delivery and payment terms. The PO number is the thread that ties every later document together. Once approved, the PO amount is recorded as a commitment against the budget, so overspending becomes visible before the invoice arrives. The free Purchase Order Register keeps committed and invoiced amounts side by side.

6. Receipt. When goods arrive, the receiver records what was delivered, how much and in what condition. For services, the requester confirms the work was done. Partial deliveries are recorded as they come.

04Steps 7 and 8: invoice, matching and payment

7. Invoice and matching. The supplier's invoice is captured, its fields extracted, and each line is compared with the PO and the receipt. Within tolerance, it is approved for payment; outside, it goes to the owner of the gap. The three-way matching guide has worked examples and a tolerance policy.

8. Payment and recording. Approved invoices are grouped into payment runs by due date, taking early-payment discounts when they are worth it. A person other than the one who maintains supplier bank details approves the run. The payment is recorded, the supplier balance cleared, and the bank statement reconciled.

05One purchase, end to end

A UK company needs 12 laptops for new hires, budgeted under "IT equipment".

  1. Supplier: the usual reseller is already set up, with bank details verified last year.
  2. Requisition: the IT manager requests 12 laptops at an estimated £1,250, so £15,000 before VAT, needed in three weeks.
  3. Approval: the amount falls in the £8,000 to £40,000 band, so the request goes to the head of IT, then finance. Remaining IT equipment budget: £22,400. Approved in one day.
  4. Sourcing: three quotes: £1,240, £1,200 and £1,275 per unit. The £1,200 offer includes a three-year warranty and wins.
  5. Purchase order: 12 × £1,200 = £14,400 before VAT. Budget remaining after commitment: £8,000.
  6. Receipt: 10 laptops arrive in week two, 2 in week three. Two receipts are recorded.
  7. Invoice: the reseller sends one invoice for 12 laptops, £14,400 plus 20% VAT, so £17,280. Quantities, prices and receipts agree, so the invoice matches automatically.
  8. Payment: the invoice is paid in the run closest to its 30-day due date. The ledger records the assets and the VAT, and the budget shows £14,400 spent and nothing left committed.

Saving against the estimate: (£1,250 - £1,200) × 12 = £600, documented in the sourcing record.

06Where the process usually breaks

  • Invoices with no PO. Purchases happen first and are regularised later, so budgets are always out of date.
  • Receipts nobody records. Matching cannot work, and invoices are approved on trust.
  • Approvals by email. No deadline, no trail, and no way to know who has the request.
  • A supplier master nobody owns. Duplicate suppliers, missing tax IDs and unverified bank details.
  • Payment runs prepared and approved by the same person. The single most important separation to keep.

Each breakdown has a matching KPI. See procure-to-pay KPIs for the formulas.

07Procure-to-pay, source-to-pay and order-to-cash

Procure-to-pay starts with the need and ends with the payment. Source-to-pay adds the strategic sourcing that comes before it: spend analysis, tenders, contract negotiation and supplier selection. Order-to-cash is the mirror image on the sales side: the customer's order, your delivery, your invoice and the cash collected. Your P2P is your supplier's order-to-cash, which is why a clean PO number on every order speeds up both sides.

08Running P2P in one system

Many companies run these eight steps across email, spreadsheets, an accounting package and a bank portal. Each handover is where documents get lost and controls get skipped. Running the chain in one place means the approved request becomes the PO, the PO is what the invoice is matched against, and the match is what releases the payment. See the procure-to-pay software in Procura, or if you are automating accounts payable first, read the AP automation guide.

09Procure-to-pay checklist

  • Supplier bank details verified independently before the first payment.
  • Requisitions state need, budget line, amount and need-by date.
  • An approval matrix enforced by the system, with no self-approval.
  • Competitive quotes above a written threshold, with the decision documented.
  • No PO sent before approval; PO amounts recorded as commitments.
  • Receipts recorded by someone other than the buyer.
  • Invoices matched line by line against PO and receipt.
  • Payment runs approved by someone who does not maintain supplier bank details.
Free Excel templates

Start with a spreadsheet.

Excel template

Purchase Order Register

Free purchase order Excel register: numbered log, committed vs invoiced amounts, automatic variances and delivery tracking.

Download free →
Excel template

Supplier Evaluation Scorecard

Free Excel supplier evaluation scorecard: six weighted, editable criteria (quality, delivery, price, service, compliance, ESG), score out of 100, automatic ranking and A, B, C tiers with a decision.

Download free →
FAQ

Frequently asked questions.

Supplier setup, need and requisition, approval, sourcing, purchase order, receipt, invoice capture and matching, then payment and recording. Smaller purchases may combine or skip some steps under a written threshold.
Procure-to-pay runs from the need to the supplier payment. Source-to-pay adds the upstream sourcing work: spend analysis, tenders, contract negotiation and supplier selection.
Ownership is shared: purchasing owns requests, sourcing and orders; requesters and receivers own receipts; accounts payable owns invoices and payments. One person, often the finance director or head of purchasing, should own the end-to-end KPIs.
Because it is where company money leaves. A complete chain makes every payment traceable to an approved need, a competitive price, an actual delivery and a verified supplier, which limits overspending, errors and fraud.

See Procura on your real data.

From request to payment, your purchasing cycle in a 30-minute demo.